HANDYPROBE PORTABLE CMM
The HandyPROBE offers an arm free portable probing system to measure accurately features on parts over large volumes. It is powered by the C-TRACK™780 dual camera sensor, which relies on a combination of advanced photogrammetry and powerful digital image processing. It generates high accuracy measures and increases the reliability and speed of the measurement process. The wireless probe gives the user total freedom to access the inspection part from any side; therefore it allows increasing quality and productivity. This portable CMM has been designed and optimized to operate in shop floor conditions. The HandyPROBE system is compatible with inspection software packages like µLog, Metrolog XG., Polyworks, PowerINSPECT, Prelude INSPECTION, Inca 3D, among other softwares.
Click here to watch a video of the HandyPROBE NEW
Benefits
Accuracy & Execution:
-
In Dynamic referential mode, both the C-Track sensor and the part can be moved during the measurement process without any loss in accuracy or tracking
-
Allowance of data acquisition of hard-to-reach areas and measurement in environments with vibrations without requiring rigid set-ups
Time-saving measurement:
-
Handheld, armless device and data transmission process
-
Free movement around the part
-
Automatic alignment with optical reflectors allowing to probe many identical parts in rapid succession
Extendable measurement volume:
-
The measurement volume can be easily extended with no loss in accuracy or additional alignment set-up involved
-
Less set-ups and error accumulation by no need for the operator to re-align data after moving the part or the C-Track
Portability:
-
100% portable that makes possible to inspect or reverse engineer parts, sub-units or complex assemblies
-
Unequalled precision, mobility and flexibility no matter where (lab, factory, off-site, etc.)
User friendly:
-
Easy to learn
-
Intuitive system with a very short learning curve
-
Installation in less than 5 minutes
Excellent ROI:
-
Productivity and money gains in the field of industrial coordinate measurements and controls
C-TRACK DUAL-CAMERA SENSOR
Click on each C-Track to see its specifications
The C-Track dual-camera sensor is fitted with high quality optics and special lighting, enabling it to measure all reflectors within its operating space. In addition to tracking the whole system’s reference model, the C-Track ensures the exact localization of the HandyPROBE, performs continuous image acquisition and transmission, lighting of reflectors, wireless communication with the HandyPROBE stylus, management of the exchanges with the computer and storage of the sensor parameters.
APPLICATIONS
- Reverse engineering
- 3D modelling
- Validation and inspection of tools
- Supplier quality inspection
- Maintenance repair and overhaul
- Conformity assessment of 3D models against original parts
- Part to CAD inspection
- First article inspection
- Manual and automated statistical analysis
- Multi-shot measurement (up to 30 points/sec.)
INDUSTRIES
- Auto industry
- Aerospace
- Ship and boat building
- Tool making
- Research & Development
- Education
- Preservation
- Architecture
- Archaeology
TECHNICAL SPECIFICATIONS
- Weight (handyPROBE): 450 g
- Dimensions (handyPROBE): 204 x 159 x 97mm
- Weight (C-Track 780): 5.5 Kg
- Dimensions (C-Track 780): 1089 x 174 x 119 mm
- Measurements: 30 points/s
- Single Point Accuracy: 25 μm
- Volumetric performance: 85 μm
- Operating Volume: 7.8 m3
- Operating temperature range: 15 °- 40 °C
- Operating humidity range (non condensing): 10- 90%
- Power supply: 100 - 240 VAC/50-60 Hz
- Certifications: EN 301 489-1, EN301 489-3, EN 300 220-1